HLie - Ceramic Coating - Solution for ash and fly ash discharge systems for thermal power plants

The thermal power industry, the cement industry, the chemical industry always have products that have to work in environments subject to high wear and corrosion. Most of the treatment plants use stainless steel material, but the service life is low because it is not resistant to abrasion

Hoang Linh ie offers the solution, production and construction is to cover the details at the location of chemical exposure and high wear resistance with a ceramic layer with high durability and high abrasion resistance.

Hoang Linh provides wear-resistant solutions for ash and fly ash discharge systems for thermal power plants

Waste Ash Treatment

Ash and slag treatment system

Ash and slag are dropped from the bottom of the furnace and temporarily stored in a silo located at the bottom of the furnace. They are transferred to an ash slurry reservoir by a pump. Or alternatively, the ash is collected at the ash silo and recycled after being transported by the chain conveyor system in dry or wet form.

The main equipment for the ash treatment system.

The ash hopper system uses a hydraulic injection system.
SDCC Chain Conveyor System
Dry ash loading system
Ash water and ash mud system.
Fly ash treatment system

With pressurized gas from the fan or from the air compressor is used to transport the ash to the silo by pipe of suitable size.

Positive pressure fly ash transport system.
- Transport system by dilution method (between gas and ash on a pipe cross section).

- Transport system by semi-dilution method.

- Concentration transport system.

Negative pressure fly ash transport system (Vacuum system).
Combination system
Economizer & Heat exchanger/ash crushing system.
HOANG LINH INDUSTRIAL EQUIPMENT SERVICE JOINT STOCK COMPANY

Address: 321 Van Cu, An Dong, An Duong, Hai Phong

Phone: 0901 587 014 – (+84225) 3533 928

Email: hlie.marketer1@gmail.com